Show Radius - Cisco MDS 9124 - Fabric Switch Reference

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show radius-server
To display all configured RADIUS server parameters, use the show radius-server command.
Syntax Description server-name
ipv4-address
ipv6-address
directed-request
groups
sorted
statistics
Defaults None.
Command Modes
EXEC mode.
Command History Release
1.3(1)
3.0(1)
Usage Guidelines Only administrators can view the RADIUS preshared key.
Examples The following example shows the output of the show radius-server command.
switch# show radius-server
Global RADIUS shared secret:Myxgqc
retransmission count:5
timeout value:10
following RADIUS servers are configured:
OL-16217-01, Cisco MDS SAN-OS Release 3.x
show radius-server [server-name | ipv4-address | ipv6-address]
[directed-request | groups | sorted | statistics]
Specifies the RADIUS server DNS name. The maximum character size is
256.
Specifies the RADIUS server IP address in the format A.B.C.D.
Specifies the RADIUS server IP address in the format X:X::X.
Displays an enabled directed request RADIUS server configuration.
Displays configured RADIUS server group information.
Displays RADIUS server information sorted by name.
Displays RADIUS statistics for the specified RADIUS server.
Modification
This command was introduced.
•
•
myradius.cisco.users.com:
available for authentication on port:1812
available for accounting on port:1813
172.22.91.37:
available for authentication on port:1812
available for accounting on port:1813
RADIUS shared secret:23MHcUnD
10.10.0.0:
available for authentication on port:1812
Added the server-name, ipv4-address, and ipv6-address arguments.
Added the directed-request and statistics options.
Cisco MDS 9000 Family Command Reference
show radius-server
22-289