Show Zone-Attribute-Group - Cisco MDS 9124 - Fabric Switch Reference

show zone-attribute-group

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show zone-attribute-group
To display the device name information, use the show zone-attribute-group command.
Syntax Description
name group-name
pending
vsan vsan-id
Defaults None.
Command Modes EXEC mode.
Command History Release
2.0(x)
Usage Guidelines None.
Examples The following example shows how to display the contents of pending zone attribute groups.
switch# show zone-autoboot-group pending
zone-attribute-group name $default_zone_attr_group$ vsan 4061
zone-attribute-group name admin-group vsan 4061
broadcast
Related Commands Command
zone-attribute-group name
Cisco MDS 9000 Family Command Reference
22-398
show zone-attribute-group [name group-name] | [pending] | [vsan vsan-id]
Displays the entire device name database.
Displays the pending device name database information.
Specifies a VSAN ID. The range is 1 to 4093.
Modification
This command was introduced.
Description
Configures zone attribute groups.
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x