Show Tacacs - Cisco MDS 9124 - Fabric Switch Reference

show tacacs+

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show tacacs+
To display the TACACS+ Cisco Fabric Services (CFS) distribution status and other details, use the show
tacacs+ command.
Syntax Description distribution status
pending
pending-diff
Defaults
None.
Command Modes EXEC mode.
Command History Release
2.0(x)
Usage Guidelines
To use this command, TACACS+ must be enabled using the tacacs+ enable command.
Examples The following example shows how to display the TACACS+ distribution status.
switch# show tacacs+ distribution status
session ongoing: no
session db: does not exist
merge protocol status: merge activation done
last operation: none
last operation status: none
Related Commands Command
tacacs+ enable
tacacs+ distribute
Cisco MDS 9000 Family Command Reference
22-358
show tacacs+ {distribution status | pending | pending-diff}
Displays the status of the TACACS+ CFS distribution.
Displays the pending configuration that is not yet applied.
Displays the difference between the active configuration and the pending
configuration.
Modification
This command was introduced.
Description
Enables TACACS+.
Initiates TACACS+ configuration distribution.
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x