Zone Rename - Cisco MDS 9124 - Fabric Switch Reference

Chapter 27 Z Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

zone rename

To rename a zone, use the zone rename command in configuration mode.
Syntax Description
current-name
new-name
vsan vsan-id
Defaults None.
Command Modes Configuration submode.
Command History Release
2.0(x)
Usage Guidelines None.
Examples The following example shows how to rename a zone.
switch# zone rename ZoneA ZoneB vsan 10
Related Commands Command
show zone
zone name
OL-16217-01, Cisco MDS SAN-OS Release 3.x
zone rename current-name new-name vsan vsan-id
Specifies the current fcalias name. Maximum length is 64 characters.
Specifies the new fcalias name. Maximum length is 64 characters.
Specifies the VSAN ID. The range is 1 to 4093.
Modification
This command was introduced.
Description
Displays zone information.
Creates and configures zones.
Cisco MDS 9000 Family Command Reference
zone rename
27-17