Show Zoneset - Cisco MDS 9124 - Fabric Switch Reference

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show zoneset

To display the configured zone sets, use the show zoneset command.
Syntax Description
active
vsan
vsan-id
brief
name
zoneset-name
pending
Defaults None.
Command Modes
EXEC mode
Command History Release
1.2(2)
Usage Guidelines None.
Examples
The following example displays configured zone set information.
switch# show zoneset vsan 1
zoneset name ZoneSet2 vsan 1
OL-16217-01, Cisco MDS SAN-OS Release 3.x
show zoneset [[active [vsan vsan-id]] |
[brief [active [vsan vsan-id] | vsan vsan-id]] |
[name zoneset-name
[active vsan vsan-id] |
[brief [active vsan vsan-id | vsan vsan-id]] |
[pending [active vsan vsan-id | brief [active vsan vsan-id | vsan vsan-id] | vsan vsan-id]] |
[vsan vsan-id]] |
[pending
[active vsan vsan-id] |
[brief [active vsan vsan-id | vsan vsan-id]] |
[vsan vsan-id]] |
[vsan vsan-id]]
Displays only active zone sets.
Displays the VSAN.
Specifies the ID of the VSAN. The range is 1 to 4093
Displays zone set members in a brief list.
Displays members of a specified zone set.
Specifies the zone set name. The maximum is 64.
Displays zone sets members that are in session.
Modification
This command was modified.
Cisco MDS 9000 Family Command Reference
show zoneset
22-399