Cisco MDS 9124 - Fabric Switch Reference page 1310

show port-resources module
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show port-resources module
To display information about port resources in a Generation 2 module, use the show port-resources
command.
Syntax Description slot
Defaults
None.
Command Modes
EXEC mode.
Command History Release
3.0(1)
Usage Guidelines
None.
Examples
The following example displays the Generation 2 module shared resources configuration.
switch# show port-resources module 2
Module 2
Available dedicated buffers are 5164
Port-Group 1
Total bandwidth is 12.8 Gbps
Total shared bandwidth is 4.8 Gbps
Allocated dedicated bandwidth is 8.0 Gbps
--------------------------------------------------------------------
Interfaces in the Port-Group B2B Credit Bandwidth Rate Mode
--------------------------------------------------------------------
fc2/1
fc2/2
fc2/3
fc2/4
fc2/5
fc2/6
Port-Group 2
Total bandwidth is 12.8 Gbps
Total shared bandwidth is 4.8 Gbps
Allocated dedicated bandwidth is 8.0 Gbps
--------------------------------------------------------------------
Interfaces in the Port-Group B2B Credit Bandwidth Rate Mode
--------------------------------------------------------------------
fc2/7
Cisco MDS 9000 Family Command Reference
22-278
show port-resources module slot
Modification
This command was introduced.
Specifies the module number. The range is 1 to 6.
Buffers (Gbps)
16 4.0 shared
16 4.0 shared
16 4.0 shared
16 4.0 shared
16 4.0 dedicated
16 4.0 dedicated
Buffers (Gbps)
16 4.0 shared
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x