System Startup-Config - Cisco MDS 9124 - Fabric Switch Reference

Chapter 21 S Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

system startup-config

To release a system startup configuration lock, use the system startup-config command in EXEC mode.
Syntax Description
unlock lock-id
Defaults
Disabled.
Command Modes
EXEC.
Command History Release
2.0(1b)
Usage Guidelines
The system startup-config command allows you to unlock or release the rr_token lock. To determine
the lock-id, use the show system internal sysmgr startup-config locks command.
Examples The following example releases the system configuration lock with identifier 1.
switch# system startup-config unlock 1
Related Commands Command
show system
OL-16217-01, Cisco MDS SAN-OS Release 3.x
system startup-config unlock lock-id
Configures the system startup-config unlock ID number. The range is 0 to
65536.
Modification
This command was introduced.
Description
Displays system information.
Cisco MDS 9000 Family Command Reference
system startup-config
21-109