Write-Accelerator - Cisco MDS 9124 - Fabric Switch Reference

Chapter 26 W Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
switch# config terminal
switch(config)# interface fcip 51
switch(config-if)# write-accelerator tape-accelerator
The following command disables tape acceleration on the specified FCIP interface.
switch# config terminal
switch(config)# interface fcip 51
switch(config-if)# no write-accelerator tape-acceleration
The following command disables both write acceleration and tape acceleration on the specified FCIP
interface.
switch# config terminal
switch(config)# interface fcip 51
switch(config-if)# no write-accelerator
Related Commands Command
show interface fcip
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Description
Displays an interface configuration for a specified FCIP interface.
Cisco MDS 9000 Family Command Reference

write-accelerator

26-5