Show Boot - Cisco Catalyst 3560-X Command Reference Manual

show boot

show boot
Syntax Description
Command Modes
Command History
Usage Guidelines
Examples
Catalyst 3750-X and 3560-X Switch Command Reference
2-520
Downloaded from www.Manualslib.com
Use the show boot privileged EXEC command to display the settings of the boot environment variables.
show boot [ | {begin | exclude | include} expression]
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Privileged EXEC
Release Modification
12.2(53)SE2 This command was introduced.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
This is an example of output from the show boot command for all stack members.
each field in the display. An example image_name is c3750x-universal-mz.122-53.SE2
Switch# show boot
BOOT path-list : flash: image_name .bin
Config file : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break : no
Manual Boot : yes
HELPER path-list :
Auto upgrade : yes
Auto upgrade path :
-------------------
Switch 2
-------------------
BOOT path-list : flash: image_name .bin
Config file : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break : no
Manual Boot : yes
HELPER path-list :
Auto upgrade : no
Auto upgrade path :
-------------------
<output truncated>
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
Table 2-27 describes
OL-21522-02