Cisco MDS 9124 - Fabric Switch Reference page 1305

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show port-channel
Use the show port-channel command to view information about existing PortChannel configurations.
Syntax Description compatibility-parameters
consistency
detail
database
interface port-channel
port-channel-number
summary
usage
Defaults None.
Command Modes
EXEC mode.
Command History Release
1.0(2)
3.0(1)
Usage Guidelines None.
Examples The following example displays the PortChannel summary.
switch# show port-channel summary
NEW
The following example displays the PortChannel compatibility parameters.
switch# show port-channel compatibility-parameters
Parameters that have to be consistent across all members in a port-channel.
1. physical port layer
Members must have the same interface type, such as fibre channel, ethernet
or fcip.
2. port mode
OL-16217-01, Cisco MDS SAN-OS Release 3.x
show port-channel {compatibility-parameters | consistency [detail] | database [interface
port-channel port-channel-number] | summary | usage}
Modification
This command was introduced.
Increased the interface port-channel range to 256.
•
• Modified the output of the compatibility-parameters option.
Displays compatibility parameters.
Displays the database consistency information of all modules.
Displays detailed database consistency information.
Displays PortChannel database information.
Specifies the PortChannel number. The range is 1 to 256.
Displays PortChannel summary.
Displays PortChannel number usage.
Cisco MDS 9000 Family Command Reference
show port-channel
22-273