Ssm Enable Feature - Cisco MDS 9124 - Fabric Switch Reference

Chapter 21 S Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

ssm enable feature

To enable a feature on the Storage Services Module (SSM), use the ssm enable feature command. To
disable the feature on the module, use the no form of the command.
Syntax Description
invista
nasb
nsp
santap
scsi-flow
force
module slot-number
bootflash: uri
modflash: uri
slot0:uri
interface
fc slot/port
fc slot/port-port
Defaults Disabled.
Command Modes
Configuration mode.
OL-16217-01, Cisco MDS SAN-OS Release 3.x
ssm enable feature {
invista {bootflash: uri | force module slot-number | modflash: uri | module slot-number |
slot0: uri} |
nasb {force module slot-number | interface fc slot/port-port} | module slot-number} |
nsp {bootflash: uri | force module slot-number | modflash: uri | module slot-number |
slot0: uri} |
santap {force module slot-number | interface fc slot/port-port | module slot-number} |
scsi-flow {force module slot-number | interface fc slot/port-port | module slot-number}}
no ssm enable feature {
invista {bootflash: uri | force module slot-number | modflash: uri | module slot-number |
slot0: uri} |
nasb {force module slot-number | interface fc slot/port-port} | module slot-number} |
nsp {bootflash: uri | force module slot-number | modflash: uri | module slot-number |
slot0: uri} |
santap {force module slot-number | interface fc slot/port-port | module slot-number} |
scsi-flow {force module slot-number | interface fc slot/port-port | module slot-number}}
Enables the Invista feature on the SSM.
Enables the Network-Accelerated Serverless Backup (NASB) feature on
the SSM.
Enables the Network Storage Processor (NSP) feature on the SSM.
Enables the SANTap feature on the SSM.
Enables the SCSI flow feature on the SSM.
Forces an immediate configuration change.
Specifies the slot number of the SSM.
Specifies the source location for internal bootflash with image name.
Specifies the source location for internal modflash with image name.
Specifies the source location for the CompactFlash memory or PC Card
with image name.
Specifies the interface to be configured.
Configures the Fibre Channel interface.
Configures the Fibre Channel interface range of ports. See the usage
guidelines for this command for a list of interface range restrictions.
Cisco MDS 9000 Family Command Reference
ssm enable feature
21-59