Cisco MDS 9124 - Fabric Switch Reference page 1428
Cisco mds 9000 family command reference - cisco mds san-os release 3.0(1) through 3.3(1a) (ol-16217-01, april 2008)
Hide thumbs
Also See for Cisco MDS 9124 - Fabric Switch:
- Datasheet (9 pages) ,
- Specifications (3 pages) ,
- Command reference manual (1640 pages)
Table of Contents
Advertisement
show zone analysis
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Table 22-14
zoning database.
Table 22-14
Field
Last updated at
Last Updated by
Num zonesets
Num zones
Cisco MDS 9000 Family Command Reference
22-396
Num zones: 1
Num aliases: 0
Num attribute groups: 0
Formatted database size: < 1 Kb / 2000 kb ( < 1% usage)
Unassigned zones:
zone name z1 vsan 1
describes the fields displayed in the output of a show zone analysis command for the full
show zone analysis Field Descriptions for the Full Zoning Database
Description
Displays a time stamp showing when the full zoning database was
last updated.
Displays the agent that most recently modified the full zoning
database. The agent can be one of the following three types:
Local: indicates that the full database was last modified locally
•
through a configuration change from one of the following
applications:
CLI: The full zoning database was modified by the user
–
from the Command Line Interface.
SNMP: The full zoning database was modified by the user
–
through the Simple Network Management Protocol
(SNMP).
GS: The full zoning database was modified from the
–
Generic Services (GS) client.
CIM: The full zoning database was modified by the
–
applications using the Common Information Model (CIM).
INTERNAL: The full zoning database was modified as a
–
result of an internal activation either from Inter-VSAN
Routing (IVR) or from the IP Storage services manager.
Merge: indicates that the full database was last modified by the
•
Merge protocol. In this case, the interface on which the merge
occurred is also displayed.
Remote: indicates that the full database was last modified by
•
the Change protocol, initiated by a remote switch, when the full
zone set distribution was enabled. The domain, IP address, and
switch name of the switch initiating the change are also
displayed.
The switch name is displayed on the next line, aligned with
Note
the domain, only if the switch name is set. The default
switch name switch and the ip-address are not displayed.
Displays the total number of zone sets in the database.
Displays the total number of zones in the database, including
unassigned zones.
Chapter 22
Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Advertisement
Table of Contents
