Tacacs-Server Directed-Request - Cisco MDS 9124 - Fabric Switch Reference

Chapter 23 T Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

tacacs-server directed-request

To specify a TACACS+ server to send authentication requests to when logging in, use the tacacs-server
directed-request command. To revert to sending the authentication request to the configured group, use
the no form of the command.
Syntax Description This command has no arguments or keywords.
Defaults Disabled.
Command Modes Configuration mode.
Command History Release
3.0(1)
Usage Guidelines The user can specify the username@servername during login. The user name is sent to the server name
for authentication.
Examples
The following example shows how to specify a TACACS+ server to send authentication requests when
logging in.
switch# config terminal
switch(config)# tacacs-server directed-request
Related Commands Command
show tacacs-server
show tacacs-server
directed request
OL-16217-01, Cisco MDS SAN-OS Release 3.x
tacacs-server directed-request
no tacacs-server directed-request
Modification
This command was introduced.
Description
Displays all configured TACACS+ server parameters.
Displays a directed request TACACS+ server configuration.
tacacs-server directed-request
Cisco MDS 9000 Family Command Reference
23-7