Chapter 22
Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show npv status
To display the N Port Virtualization (NPV) current status, use the show npv status command.
Syntax Description
This command has no other arguments or keywords.
Defaults
None.
Command Modes
EXEC mode.
Command History
Release
3.2(1)
Usage Guidelines
None.
Examples
The following example displays the current status of NPV.
switch# show npv status
External Interfaces:
====================
Number of External Interfaces: 6
Interface: fc1/1, FCID: 0x330037, State: Up
Interface: fc1/2, FCID: 0x330038, State: Up
Interface: fc1/3, FCID: 0x330039, State: Up
Interface: fc1/4, FCID: 0x33003a, State: Up
Interface: fc1/23, FCID: 0x7d0007, State: Up
Interface: fc1/24, FCID: 0x7d0006, State: Up
Server Interfaces:
==================
Number of Server Interfaces: 4
Interface: fc1/13, NPIV: Yes, State: Up
Interface: fc1/14, NPIV: Yes, State: Up
Interface: fc1/15, NPIV: Yes, State: Up
Related Commands
Command
show npv flogi-table
OL-16217-01, Cisco MDS SAN-OS Release 3.x
show npv status
Modification
This command was introduced.
Description
Displays the information about NPV FLOGI session.
Cisco MDS 9000 Family Command Reference
show npv status
22-269