Show Hardware - Cisco MDS 9124 - Fabric Switch Reference

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show hardware

To display switch hardware inventory details, use the show hardware command.
Syntax Description
ipc-channel status
Defaults None.
Command Modes EXEC mode.
Command History Release
1.2(1)
Usage Guidelines None.
Examples The following example displays the switch hardware inventory details.
switch# show hardware
Cisco Storage Area Networking Operating System (SAN-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2006, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software may be covered under the GNU Public
License or the GNU Lesser General Public License. A copy of
each such license is available at
http://www.gnu.org/licenses/gpl.html and
http://www.gnu.org/licenses/lgpl.html
Software
BIOS:
loader:
kickstart: version 3.0(3) [gdb]
system:
BIOS compile time:
kickstart image file is: bootflash:///boot-3.0.3
kickstart compile time:
system image file is:
system compile time:
Hardware
cisco MDS 9509 ("Supervisor/Fabric-1")
Intel(R) Pentium(R) III CPU with 1028604 kB of memory.
OL-16217-01, Cisco MDS SAN-OS Release 3.x
show hardware [ipc-channel status]
Displays the status of the interprocess communication (IPC) channels.
Modification
This command was introduced.
version 1.1.0
version 1.2(2)
version 3.0(3) [gdb]
10/24/03
9/15/2006 10:00:00 [10/02/2006 06:26:25]
bootflash:///isan-3.0.3
9/15/2006 10:00:00 [10/02/2006 06:45:25]
Cisco MDS 9000 Family Command Reference
show hardware
22-129