Iscsi Enable - Cisco MDS 9124 - Fabric Switch Reference

Chapter 11 I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

iscsi enable

To enable the iSCSI feature in any Cisco MDS switch, issue the iscsi enable command. To disable this
feature, use the no form of the command.
Syntax Description
This command has no arguments or keywords.
Defaults
Disabled.
Command Modes Configuration mode.
Command History Release
1.3(1)
3.2(2c)
Usage Guidelines
The configuration and verification commands for the iSCSI feature are only available when iSCSI is
enabled on a switch. When you disable this feature, all related configurations are automatically
discarded.
This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class
Note
BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Examples
The following command enables the iSCSI feature.
switch(config)# iscsi enable
switch(config)# iscsi enable module 8
switch(config)# int iscsi 2/1
switch(config-if)#
switch(config)# no shutdown
The following command disables the iSCSI feature (default).
switch(config)# no iscsi enable
OL-16217-01, Cisco MDS SAN-OS Release 3.x
iscsi enable
no iscsi enable
Modification
This command was introduced.
Updated the example command.
Cisco MDS 9000 Family Command Reference
iscsi enable
11-87