Interface Port-Channel - Cisco MDS 9124 - Fabric Switch Reference

Chapter 11 I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

interface port-channel

To configure a PortChannel interface on the Cisco MDS 9000 Family of switches, use the interface
port-channel command.
Syntax Description number
channel mode active
fcdomain
rcf-reject
vsan
vsan-id
fspf
cost
link_cost
dead-interval
seconds
ficon
portnumber portnumber Configures the FICON port number for this interface.
hello-interval
seconds
isns
profile-name
passive
retransmit-interval
seconds
Defaults
Disabled.
Command Modes
Configuration mode.
OL-16217-01, Cisco MDS SAN-OS Release 3.x
interface port-channel number
channel mode active
fcdomain rcf-reject vsan vsan-id
fspf [cost link_cost | dead-interval seconds | ficon portnumber portnumber | hello-interval
seconds | isns profile-name | passive | retransmit-interval seconds]
interface port-channel number
no channel mode active
no fcdomain rcf-reject vsan vsan-id
no fspf [cost link_cost | dead-interval seconds | ficon portnumber portnumber | hello-interval
seconds | isns profile-name | passive | retransmit-interval seconds]
no interface port-channel number
Enter PortChannel number. The range is 1 to 128.
Configures the channel mode for the PortChannel interface
Enter the interface submode
Configure the rcf-reject flag
Specify the vsan range
The ID of the VSAN is from 1 to 4093.
Configure FSPF parameters
Configure FSPF link cost
Enter FSPF link cost 1-65535
Configure FSPF dead interval
Enter dead interval (in sec) 2-65535
Configures FICON parameters.
Configure FSPF hello-interval
Enter hello interval (in sec) 1-65535
Tags this interface to the Internet Storage Name Service (iSNS) profile.
SPecifies the profile name to tag the interface.
Enable/disable FSPF on the interface
Configure FSPF retransmit interface
Enter retransmit interval (in sec) 1-65535
Cisco MDS 9000 Family Command Reference
interface port-channel
11-35