Show San-Ext-Tuner - Cisco MDS 9124 - Fabric Switch Reference

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show san-ext-tuner

To display SAN extension tuner information, use the show san-ext-tuner command.
Syntax Description interface
gigabitethernet slot/port Specifies a Gigabit Ethernet interface.
nport
pwwn pwwn-id
vsan vsan-id
counters
nports
Defaults
None.
Command Modes EXEC mode.
Command History Release
2.0(x)
Usage Guidelines
None.
Examples The following example shows how to display SAN extension tuner N port information.
switch# show san-ext-tuner nports
Related Commands Command
san-ext-tuner
OL-16217-01, Cisco MDS SAN-OS Release 3.x
show san-ext-tuner {interface gigabitethernet slot/port [nport pwwn pwwn-id vsan vsan-id
counters] | nports}
Displays SAN extension tuner information for a specific Gigabit Ethernet
interface.
Specifies an N port.
Specifies a pWWN ID. The format is hh:hh:hh:hh:hh:hh:hh:hh, where h is
a hexadecimal number.
Specifies a VSAN ID. The range is 1 to 4093.
Specifies SAN extension tuner counters.
Displays SAN extension tuner information for all nports.
Modification
This command was introduced.
Description
Enters SAN extension tuner configuration mode.
Cisco MDS 9000 Family Command Reference
show san-ext-tuner
22-305