Install All - Cisco MDS 9124 - Fabric Switch Reference

install all

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
install all
To upgrade all modules in any Cisco MDS 9000 family switch, use the install all command. This
upgrade can happen nondisruptively or disruptively depending on the current configuration of your
switch.
Syntax Description
asm-sfn filename
system
ssi
kickstart
URL
The following table lists the aliases for URL.
bootflash:
slot0:
volatile:
tftp:
ftp:
sftp:
scp:
image-filename
Defaults
None.
Command Modes EXEC mode.
Command History Release
1.0(3)
1.2(2)
2.0(1b)
Usage Guidelines The install all command upgrades all modules in any Cisco MDS 9000 Family switch.
Cisco MDS 9000 Family Command Reference
11-6
install all [{asm-sfn | kickstart | ssi | system} URL]
Upgrades the ASM image.
Upgrades the system image.
Upgrades the SSI image.
Upgrades the kickstart image.
The location URL of the source file to be installed.
Source location for internal bootflash memory.
Source location for the CompactFlash memory or PCMCIA card.
Source location for the volatile file system.
Source location for a Trivial File Transfer Protocol (TFTP) network server. The
syntax for this URL is tftp:[[//location]/directory]/filename.
Source location for a File Transfer Protocol (FTP) network server. The syntax for
this URL is ftp:[[//location]/directory]/filename.
Source location for a Secure Trivial File Transfer Protocol (SFTP) network server.
The syntax for this URL is sftp:[[//<username@>location]/directory]/filename.
Source location for a Secure Copy Protocol (SCP) network server. The syntax for
this URL is scp:[[//location]/directory]/filename.
The name of the source image file.
Modification
This command was introduced.
Added the asm-sfn keyword and made all keywords optional.
Added the ssi keyword.
Chapter 11
OL-16217-01, Cisco MDS SAN-OS Release 3.x
I Commands