Show Vrrp - Cisco MDS 9124 - Fabric Switch Reference

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show vrrp

To display the VRRP configuration information, use the show vrrp command.
Syntax Description ipv6
vr
group-id
interface
gigabitethernet
slot/port
configuration
statistics
status
mgmt 0
port-channel
port-channel
vsan
vsan-id
Defaults None.
Command Modes
EXEC mode.
Command History Release
1.0(2)
3.0(1)
Usage Guidelines None.
Examples The following example displays VRRP configured information.
switch# show vrrp vr 7 interface vsan 2 configuration
OL-16217-01, Cisco MDS SAN-OS Release 3.x
show vrrp [ipv6 vr group-id [interface {gigabitethernet slot/port {configuration | statistics |
status} | mgmt 0 {configuration | statistics | status} | port-channel port-channel
{configuration | statistics | status } | vsan vsan-id {configuration | statistics | status}}]] |
statistics |
vr group-id [interface {gigabitethernet slot/port {configuration | statistics | status} | mgmt
0 {configuration | statistics | status} | port-channel port-channel {configuration | statistics
| status } | vsan vsan-id {configuration | or statistics | status}}]
Displays IPv6 virtual router information.
Displays the virtual router information.
Specifies the group ID. The range is 1 to 255.
Displays the interface type.
Displays the Gigabit Ethernet interface.
Specifies the slot and port.
Displays the VRRP configuration.
Displays cumulative VRRP statistics.
Displays VRRP operational status.
Displays the mgmt0 interface.
Displays the Port Channel interface.
Specifies the Port Channel.
Displays the VSAN interface.
Specifies the VSAN ID.
Modification
This command was introduced.
Added the IPv6 option.
Cisco MDS 9000 Family Command Reference
show vrrp
22-381