Sdv Enable - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

sdv enable

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
sdv enable
To enable SDV on the switch, use the sdv enable command in configuration mode. To disable SDV, use
the no form of the command.
Syntax Description This command has no arguments or keywords.
Defaults
Disabled.
Command Modes
Configuration mode.
Command History Release
3.1(2)
NX-OS 4.1(1b)
Usage Guidelines None.
Examples The following example shows how to enable SDV.
switch# config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# sdv enable
The following example shows how to disable SDV.
switch# config t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# no sdv enable
Related Commands Command
show sdv database
show vritual-device
Cisco MDS 9000 Family Command Reference
21-18
sdv enable
no sdv enable
Modification
This command was introduced.
This command was deprecated.
Description
Displays the SDV database.
Displays the virtual devices.
Chapter 21 S Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x