Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual page 1371

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show port-channel database
To display the PortChannel database, use the show port-channel database command.
Syntax Description
interface
port-channel
port-channel number
Defaults None.
Command Modes EXEC mode.
Command History Release
NX-OS 4.1(2)
Usage Guidelines
None.
Examples
The following example shows how to display the PortChannel database:
switch# show port-channel database interface port-channel 1
port-channel 1
switch#
Related Commands Command
show port-channel
consistency
OL-18089-01, Cisco MDS NX-OS Release 4.x
show port-channel database interface port-channel {port-channel number}
Specifies the PortChannel interface.
Specifies the PortChannel.
Specifies the PortChannel number. The range is from 1 to 256.
Modification
This command was introduced.
Administrative channel mode is on
Operational channel mode is on
Last membership update succeeded
1 port in total, 0 ports up
Ports: fc1/1 [down]
Description
Displays PortChannel distributed database consistency.
show port-channel database
Cisco MDS 9000 Family Command Reference
22-303