Fabric-Binding Database Copy - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 8 F Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

fabric-binding database copy

To copy from the active fabric binding database to the configuration fabric binding database, use the
fabric-binding database copy command in EXEC mode.
Syntax Description vsan vsan-id
Defaults None.
Command Modes
EXEC mode.
Command History Release
1.3(1)
3.0(1)
Usage Guidelines Fabric binding is configured on a per-VSAN basis and can be implemented in both FICON VSANs and
Fibre Channel VSANs.
If the configured database is empty, this command is not accepted
Examples
The following example copies from the active database to the config database in VSAN 1:
switch# fabric-binding database copy vsan 1
Related Commands Command
fabric-binding diff
OL-18089-01, Cisco MDS NX-OS Release 4.x
fabric-binding database copy vsan vsan-id
Specifies the VSAN. The ID of the VSAN is from 1 to 4093.
Modification
This command was introduced.
Extended support for fabric binding to Fibre Channel VSANs.
Description
Provides the differences between the fabric-binding databases.
Cisco MDS 9000 Family Command Reference
fabric-binding database copy
8-5