Install License - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

install license

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
install license
To program the supervisor or switching module BIOS, use the install license command.
Syntax Description
bootflash:
slot0:
volatile:
file-name
Defaults
None.
Command Modes EXEC mode.
Command History Release
1.2(1)
Usage Guidelines
If a target file name is provided after the source URL, the license file is installed with that name.
Otherwise, the filename in the source URL is used. This command also verifies the license file before
installing it.
Examples The following example installs a file named license-file which resides in the bootflash: directory:
switch# install license bootflash:license-file
Related Commands Command
show license
Cisco MDS 9000 Family Command Reference
11-14
install license [bootflash: | slot0: | volatile:] file-name
Source location for the license file.
Source location for the license file.
Source location for the license file.
The name of the license file.
Modification
This command was introduced.
Description
Displays license information.
Chapter 11 I Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x