Show Fcroute - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show fcroute

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show fcroute
Use the show fcroute command to view specific information about existing Fibre Channel and FSPF
configurations.
Syntax Description distance
label
multicast
summary
unicast
vsan vsan-id
fc-id
Defaults None.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines When the number of routes are displayed in the command output, both visible and hidden routes are
included in the total number of routes.
Examples
The following example displays administrative distance:
switch# show fcroute distance
UUID
----
10
22
39
12
17
21
14
64
The following example displays multicast routing information.
switch# show fcroute multicast
VSAN FC ID
Cisco MDS 9000 Family Command Reference
22-116
show fcroute {distance | label [label] vsan vsan-id | multicast [fc-id vsan vsan-id | vsan vsan-id]
| summary [vsan vsan-id] | unicast [[host] fc-id fc-mask vsan vsan-id | vsan vsan-id]}
Displays FC route preference.
Displays label routes.
Displays FC multicast routes.
Displays the FC routes summary.
Displays FC unicast routes.
Specifies the ID of the VSAN (from 1 to 4093).
Specifies the Fibre Channel ID.
Modification
This command was introduced.
Route
Distance Name
-------- ----
20 RIB
40 FCDOMAIN
80 RIB-CONFIG
100 FSPF
120 FLOGI
140 TLPM
180 MCAST
200 RIB-TEST
# Interfaces
Chapter 22 Show Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x