Show Santap Module Dvt - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show santap module dvt brief
To display the SANTap Data Virtual Target (DVT) configuration in a brief format on the Storage Service
Module (SSM), use the show santap module dvt brief command in the EXEC mode.
Syntax Description slot
Defaults None.
Command Modes
EXEC mode.
Command History Release
3.2(1)
Usage Guidelines None.
Examples The following example displays the SANTap module DVT brief infomation for slot 13.
switch# show santap module 13 dvt brief
-------------------------------------------------------------------------------
DVT WWN
-------------------------------------------------------------------------------
50:06:0e:80:00:c3:e0:46 139639316
switch# attach
Attaching to module 13 ...
To exit type 'exit', to abort type '$.'
Bad terminal type: "xterm". Will assume vt100.
The following example displays the SANTap vttbl DVT configuration.
switch# attach module 2
module-3# show santap vttbl dvt 50:00:1f:e1:50:0c:3b:09
DVT Entry
OL-18089-01, Cisco MDS NX-OS Release 4.x
show santap module dvt brief slot
Displays SANTap configuration for a module in the specified slot.
Modification
This command was introduced.
DVT ID
module 13
:
Activated : FALSE
Number LUNs : 16
Possible Hosts :
hi_pwwn = 10:00:00:00:c9:3f:90:21 : 4 LUNs
hi_pwwn = 10:00:00:00:c9:4c:c0:e5 : 2 LUNs
hi_pwwn = 21:00:00:e0:8b:0c:7d:21 : 2 LUNs
hi_pwwn = 10:00:00:00:c9:56:ed:f2 : 2 LUNs
hi_pwwn = 50:06:0b:00:00:60:2a:a0 : 4 LUNs
hi_pwwn = 21:00:00:e0:8b:92:62:92 : 2 LUNs
show santap module dvt brief
MD DVT VSAN DVTIFIDX
3 30 0x1604000
Cisco MDS 9000 Family Command Reference
22-359