Shutdown (Cisco Sme Cluster Configuration Submode) - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 21 S Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

shutdown (Cisco SME cluster configuration submode)

To disable a cluster for recovery, use the shutdown command. To enable the cluster for recovery, use the
no form of the command.
Syntax Description This command has no arguments or keywords.
Defaults
None.
Command Modes
Cisco SME cluster configuration submode.
Command History Release
3.2(2)
Usage Guidelines To disable operation of a cluster for the purpose of recovery, use the shutdown command. To enable the
cluster for normal usage, use the no shutdown command.
The default state for clusters is no shutdown. Use the shutdown command for cluster recovery. See the
SME Troubleshooting chapter for additional details about recovery scenarios.
Examples The following example restarts the cluster after recovery is complete:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# no shutdown
The following example disables the cluster operation in order to start recovery:
switch# config t
switch(config))# sme cluster c1
switch(config-switch(config-sme-cl)# shutdown
Related Commands Command
show sme cluster
OL-18089-01, Cisco MDS NX-OS Release 4.x
shutdown
no shutdown
Modification
This command was introduced.
shutdown (Cisco SME cluster configuration submode)
Description
Displays information about the Cisco SME cluster.
Cisco MDS 9000 Family Command Reference
21-35