Show Debug - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show debug

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show debug
To display all Cisco SME related debug commands configured on the switch, use the show debug
command.
Syntax Description cluster
bypass
sap sap
sme
bypass
Defaults None.
Command Modes
EXEC mode.
Command History Release
3.2(2c)
NX-OS 4.1(1c)
Usage Guidelines None.
Examples The following example shows all debug commands configured on the switch:
switch# show debug
ILC helper:
ILC_HELPER errors debugging is on
ILC_HELPER info debugging is on
Related Commands Commands
debug sme
Cisco MDS 9000 Family Command Reference
22-56
show debug {cluster {bypass | sap sap bypass} | sme bypass}
Displays all the debugging flags.
Displays the bypass flags.
Displays all debugging flags of SAP. Specifies the SAP in the range from 1
to 65535
Displays all the debugging flags of Cisco SME.
Displays all the bypass flags of Cisco SME.
Modification
This command was introduced.
Added the syntax description.
Description
Debugs Cisco SME features.
Chapter 22 Show Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x