Setup Ficon - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 21 S Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

setup ficon

To enter the automated FICON setup mode, use the setup ficon command in EXEC mode.
Syntax Description
This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History Release
1.3(1)
Usage Guidelines
Refer to the Cisco MDS 9000 Family CLI Configuration Guide for more information on using the setup
ficon command.
The setup utility guides you through the basic configuration process. Type Ctrl-c at any prompt to skip
the remaining configuration options and proceed with what is configured to that point.
If you do not want to answer a previously configured question, or if you wish to skip answers to any
questions, press Enter. If a default answer is not available (for example switch name), the switch uses
what is already configured, and skips to the next question.
Examples The following example shows how to enter switch setup mode.
switch# setup ficon
---- Basic System Configuration Dialog ----
--- Ficon Configuration Dialog ---
This setup utility will guide you through basic Ficon Configuration
on the system.
Press Enter if you want to skip any dialog. Use ctrl-c at anytime
to skip all remaining dialogs.
Would you like to enter the basic configuration dialog (yes/no): yes
OL-18089-01, Cisco MDS NX-OS Release 4.x
setup ficon
Modification
This command was introduced.
Cisco MDS 9000 Family Command Reference
setup ficon
21-31