Debug Vni - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

debug vni

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug vni
To enable debugging for a virtual network interface (VNI), use the debug vni command in EXEC mode.
To disable a debug command, use the no form of the command or use the no debug all command to turn
off all debugging.
Syntax Description
all
errors
events
info
pss
Defaults
Disabled.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples
The following example displays the system output when the debug vni all command is issued:
switch# debug vni all
Apr 29 17:00:59 vni: Received MTS message
Apr 29 17:00:59 vni: message not processed by system mgr library , so process it normal
way
Related Commands Command
no debug all
Cisco MDS 9000 Family Command Reference
6-124
debug vni {all | errors | events | info | pss}
no debug vni {all | errors | events | info | pss}
Modification
This command was introduced.
Description
Disables all debugging.
Enables debugging for all VNI features.
Enables debugging for VNI error conditions.
Enables debugging for VNI events.
Enables debugging for VNI events.
Enables debugging for VNI PSS packets.
Chapter 6 Debug Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x