Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual page 692

iscsi dynamic initiator
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class
Note
BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Examples
The following command configures the dynamic initiator mode as iSLB.
switch(config)# iscsi dynamic initiator islb
The following command configures the dynamic initiator mode as deny.
switch(config)# iscsi dynamic initiator deny
The following command reverts to the default dynamic initiator mode of iSCSI.
switch(config)# no iscsi dynamic initiator deny
Related Commands Command
iscsi save-initiator
show iscsi global
Cisco MDS 9000 Family Command Reference
11-86
Description
Permanently saves the automatically-assigned nWWN or pWWN mapping.
Displays global iSCSI configured information.
Chapter 11 I Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x