Show Fcip - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show fcip

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show fcip
To display FCIP profile information, use the show fcip command.
Syntax Description host-map fcip-id
profile
profile-id
all
summary
tape-session
tunnel tunnel-id
host-end
target-end
target-map fcip-id
wa-login-list tunnel-id
Defaults
None.
Command Modes EXEC mode.
Command History Release
1.1(1)
2.0(x)
3.0(1)
Usage Guidelines
None.
Examples The following example displays all FCIP profiles:
switch# show fcip profile all
----------------------------------------------------
ProfileId
----------------------------------------------------
1
2
3
4
Cisco MDS 9000 Family Command Reference
22-110
show fcip {host-map fcip-id | profile [profile-id | all] | summary | tape-session {summary | tunnel
tunnel-id {host-end | target-end}} | target-map fcip-id | wa-login-list tunnel-id}
Displays the information for a specified map. The range is 1 to 255.
Displays the information for a profile.
Specifies the profile ID. The range is 1 to 255.
Specifies all profile IDs.
Displays summary information.
Displays tape session information.
Displays information for a specified FCIP tunnel ID. The range is 1 to 255.
Displays information for the host end.
Displays information for the target end.
Displays information for a specified target map. The range is 1 to 255.
Displays the write acceleration login list for a specified FCIP tunnel ID. The
range is 1 to 255.
Modification
This command was introduced.
Added the host-map, summary, and target-map keywords.
Added the tape-session, tunnel, host-end, target-end, and wa-login-list
keywords.
Ipaddr
41.1.1.2
10.10.100.154
43.1.1.2
44.1.1.100
TcpPort
3225
3225
3225
3225
Chapter 22 Show Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x