Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual page 761

Chapter 13 K Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
key-ontape
To configure keys on the tape mode and store the encrypted security keys on the backup tapes, use the
key-ontape command. To disable this feature, use the no form of the command.
Syntax Description This command has no arguments or keywords.
Defaults
Disabled.
Command Modes
Cisco SME cluster configuration submode.
Command History Release
3.2(2)
Usage Guidelines This command allows the encrypted security keys to be stored on the backup tapes.
This feature is supported only for unique keys.
Note
Before using this command, automatic volume grouping should be disabled by using the auto-volgrp
command.
Examples The following example enables the key-ontape feature:
switch# config terminal
switch(config)# sme cluster clustername1
switch(config-sme-cl)# key-ontape
The following example disables the key-ontape feature:
switch# config terminal
switch(config)# sme cluster clustername1
switch(config-sme0-cl)# no key-ontape
OL-18089-01, Cisco MDS NX-OS Release 4.x
key-ontape
no key-ontape
Modification
This command was introduced.
Cisco MDS 9000 Family Command Reference
key-ontape
13-7