Show Port-Channel Consistency - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show port-channel consistency

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show port-channel consistency
To display the PortChannel distributed database consistency, use the show port-channel consistency
command.
Syntax Description detail
Defaults None.
Command Modes
EXEC mode.
Command History Release
NX-OS 4.1(3)
Usage Guidelines None.
Examples The following example shows how to display the Port Channel distributed database consistency:
switch# show port-channel consistency detail
Authoritative port-channel database:
================================================
total 1 port-channels
port-channel 1:
================================================
database 1: from module 1
================================================
total 1 port-channels
port-channel 1:
================================================
switch#
Related Commands Command
show port-channel
compatibity-parameters
Cisco MDS 9000 Family Command Reference
22-308
show port-channel consistency{detail}
Specifies the PortChannel distributed database in all modules.
Modification
This command was introduced.
1 ports, first operational port is none
fc1/1 [down]
1 ports, first operational port is none
fc1/1 [down]
Description
Displays PortChannel compatibility parameters.
Chapter 22 Show Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x