System Heartbeat - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

system heartbeat

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
system heartbeat
To enable system heartbeat checks, use the system heartbeat command in EXEC mode. Use the no form
of this command to disable this feature.
Syntax Description This command has no arguments or keywords.
Defaults
Enabled.
Command Modes
EXEC mode.
Command History Release
1.0(2)
Usage Guidelines You can disable the heartbeat checking feature (enabled by default) for debugging and troubleshooting
purposes like attaching a GDB to a specified process.
Examples The following example enables the system heartbeat checks.
switch# system heartbeat
Cisco MDS 9000 Family Command Reference
21-122
system heartbeat
system no heartbeat
Modification
This command was introduced.
Chapter 21 S Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x