Chapter 7 E Command; Email-Contact - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

email-contact

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
email-contact
To configure an e-mail contact with the Call Home function, use the email-addr command in Call Home
configuration submode. To disable this feature, use the no form of the command.
Syntax Description email-address
Defaults None.
Command Modes Call Home configuration submode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples The following example shows how to configure e-mail contact in the Call Home configuration:
switch# config terminal
Enter configuration commands, one per line.
switch(config)# callhome
switch(config-callhome)# email-contact username@company.com
Related Commands Command
callhome
callhome test
show callhome
Cisco MDS 9000 Family Command Reference
7-2
email-addr email-address
no email-addr email-address
Configures an e-mail address. Uses a standard e-mail address that does not
have any text size restrictions.
Modification
This command was introduced.
Description
Configures the Call Home function.
Sends a dummy test message to the configured destination(s).
Displays configured Call Home information.
End with CNTL/Z.
OL-18089-01, Cisco MDS NX-OS Release 4.x
Chapter 7 E Commands