Show Ivr - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show ivr

To display various Inter-VSAN Routing (IVR) configurations, use the show ivr command.
Syntax Description merge
pending
pending-diff
vsan vsan-id
session
status
virtual-domains
virtual-fcdomain-add-
status
vsan-topology
active
configured
zone
name name
zoneset
brief
fabric
Defaults None.
Command Modes EXEC mode.
Command History Release
1.3(1)
2.0(1b)
Usage Guidelines
To access this command, you must perform the ivr enable command.
Examples The following example displays the status of the IVR virtual domain configuration.
OL-18089-01, Cisco MDS NX-OS Release 4.x
show ivr [pending | pending-diff | session status | virtual-domains [vsan vsan-id] |
virtual-fcdomain-add-status | vsan-topology [active | configured] | zone [active | name name
[active]] | zoneset [active | brief | fabric | name name | status]]
Displays the IVR merge status.
Displays the IVR pending configuration.
Displays the IVR pending configuration differences with the active
configuration.
Specifies a VSAN ID. The range is 1 to 4093.
Displays the IVR session status.
Displays the status of the configured IVR session.
Displays IVR virtual domains for all local VSANs.
Displays IVR virtual fcdomain status.
Displays the IVR VSAN topology
Displays the active IVR facilities.
Displays the configured IVR facilities
Displays the Inter-VSA Zone (IVZ) configurations.
Specifies the name as configured in the database.
Displays the Inter-VSA Zone Set (IVZS) configurations.
Displays configured information in brief format.
Displays the status of active zone set in the fabric.
Modification
This command was introduced.
Added the pending and pending-diff keywords.
Cisco MDS 9000 Family Command Reference
show ivr
22-241