Show Santap Module Dvt - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show santap module dvt

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show santap module dvt
To display the SANTap DVT configuration on the Storage Service Module (SSM), use the show santap
module dvt command in the EXEC mode.
Syntax Description slot
name
brief
Defaults None.
Command Modes
EXEC mode.
Command History Release
NX-OS 4.1(1b)
Usage Guidelines None.
Examples The following example displays the SANTap DVT configuration:
switch# show santap module 2 dvt
DVT Information :
Related Commands Command
show santap vttbl
Cisco MDS 9000 Family Command Reference
22-358
show santap module slot dvt {name | brief}
Specifies the module number. The range is from 1 to 9.
Specifies the user name for DVT.
Displays SANTap DVT configuration in a brief format.
Modification
This command was introduced.
dvt pwwn = 22:00:00:20:37:88:20:ef
dvt nwwn = 20:00:00:20:37:88:20:ef
dvt id = 3
dvt mode = 3
dvt vsan = 3
dvt fp_port = 0
dvt if_index = 0x1080000
dvt name = MYDVT
Description
Displays the SANTap VTTBL configuration.
Chapter 22 Show Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x