Show Role - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show role

To display the description about the various Cisco SME role configurations, use the show role command.
Syntax Description
This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History Release
3.3(1a)
NX-OS 4.1(1c)
Usage Guidelines Execute the setup sme command to set up theCisco SME administrator and Cisco SME recovery roles
and then use the show role command to display the role details.
Examples The following example displays the Cisco SME role configurations:
switch# setup sme
Set up four roles necessary for SME, sme-admin, sme-stg-admin, sme-kmc-admin and
sme-rec-officer? (yes/no) [no] yes
SME setup done
switch# show role
Role: sme-admin
Description: new role
Vsan policy: permit (default)
-------------------------------------------------
Rule
-------------------------------------------------
1
2
3
Role: sme-storage
Description: new role
Vsan policy: permit (default)
-------------------------------------------------
Rule
-------------------------------------------------
1
2
3
OL-18089-01, Cisco MDS NX-OS Release 4.x
show role
Modification
This command was introduced.
Changed the command output.
Type Command-type
permit show
permit config
permit debug
Type Command-type
permit show
permit config
permit debug
Feature
sme
sme
sme
Feature
sme-stg-admin
sme-stg-admin
sme-stg-admin
Cisco MDS 9000 Family Command Reference
show role
22-329