Show Ips Ip Route - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show ips ip route

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show ips ip route
To show the IP storage route table information, use the show ips ip route command.
Syntax Description
interface gigabitethernet slot/port Specifies a Gigabit Ethernet interface by the slot and port.
Defaults None.
Command Modes EXEC mode.
Command History Release
1.1(1)
Usage Guidelines None.
Examples The following example displays the IP route table information for a Gigabit Ethernet interface:
switch# show ips ip route interface gigabitethernet 8/1
Codes: C - connected, S - static
No default gateway
C 10.1.3.0/24 is directly connected, GigabitEthernet8/1
Cisco MDS 9000 Family Command Reference
22-186
show ips ip route interface gigabitethernet slot/port
Modification
This command was introduced.
Chapter 22 Show Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x