Modem Connect Line - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 15 M Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

modem connect line

To enable a modem connection when the switch is already in operation, use the modem connect line
command in EXEC mode.
Syntax Description com1
console
Defaults Disabled.
Command Modes
EXEC mode.
Command History Release
1.2(2)
Usage Guidelines If the switch is already in operation when the modem is connected, issue this command to notify the
software that a modem is going to be added.
You must issue the modem connect line command before setting the user-input string for initialization.
Examples
The following example announces a modem connection from the line console:
switch# modem connect line console
The following example announces a modem connection from the COM1 port:
switch# modem connect line com1
OL-18089-01, Cisco MDS NX-OS Release 4.x
modem connect line {com1 | console}
Connects the modem through a COM1 line connection
Connects the modem through a console line connection
Modification
This command was introduced.
Cisco MDS 9000 Family Command Reference
modem connect line
15-15