Chapter 22
Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show npv traffic-map
To display an N port virtualization (NPV) traffic map, use the show npv traffic-map command.
Syntax Description
This command has no arguments or keywords.
Defaults
None.
Command Modes
EXEC mode.
Command History
Release
3.3(1a)
Usage Guidelines
None.
Examples
The following example displays the NPV traffic map information.
switch# show npv traffic-map
NPV Traffic Map Information:
----------------------------------------
Server-If
----------------------------------------
fc1/10
fc1/20
----------------------------------------
switch#
Related Commands
Command
show npv flogi-table
show npv internal info
traffic-map
OL-18089-01, Cisco MDS NX-OS Release 4.x
show npv traffic-map
Modification
This command was introduced.
External-If(s)
fc1/9,fc1/13
fc1/9,fc1/13
Description
Displays information about NPV FLOGI sessions.
Displays internal information about the traffic map.
Cisco MDS 9000 Family Command Reference
show npv traffic-map
22-295