Ivr Virtual-Fcdomain-Add2 - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 11 I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

ivr virtual-fcdomain-add2

To configure the request domain_ID (RDI) mode in a specific autonomous fabric ID (AFID) and VSAN
for all IVR-enabled switches, use the ivr virtual-fcdomain-add2 command. To delete the RDI mode,
use the no form of the command.
Syntax Description
fabric-id value
vsan-ranges value
Defaults None.
Command Modes
Configuration mode.
Command History Release
3.3(1a)
Usage Guidelines This is a CFS distributable command.
Examples The following example configures the RDI mode on a specific AFID and VSAN.
switch# config
Enter configuration commands, one per line. End with CNTL/Z.
switch# ivr virtual-fcdomain-add2 autonomous-fabric-id 1 vsan-ranges 2
switch# fabric is now locked for configuration. Please 'commit' configuration when done.
switch(config)# ivr commit
Related Commands Command
show ivr
virtual-fcdomain-add-
status2
OL-18089-01, Cisco MDS NX-OS Release 4.x
ivr virtual-fcdomain-add2 autonomous-fabric-id value vsan-ranges value
no ivr virtual-fcdomain-add2 autonomous-fabric-id value vsan-ranges value
Specifies the fabric ID on which the RDI mode needs to be configured.
Specifies the VSAN range value on which the RDI mode needs to be
configured.
Modification
This command was introduced.
Description
Displays the RDI mode in a specific AFID and VSAN for all IVR-enabled
switches.
ivr virtual-fcdomain-add2
Cisco MDS 9000 Family Command Reference
11-137