Radius-Server Retransmit - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

radius-server retransmit

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
radius-server retransmit
To globally specify the number of times the switch should try a request with a RADIUS server, use the
radius-server retransmit command. To revert to default value, use the no form of the command.
Syntax Description count
Defaults 1 retransmission
Command Modes Configuration mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples The following example configures the number of retransmissions to 3.
switch# config terminal
switch(config)# radius-server retransmit 3
Related Commands Command
show radius-server
Cisco MDS 9000 Family Command Reference
20-10
radius-server retransmit count
no radius-server retransmit count
Configures the number of times the switch tries to connect to a RADIUS
server(s) before reverting to local authentication. The range is 1 to 5 times.
Modification
This command was introduced.
Description
Displays RADIUS server information.
Chapter 20 R Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x