Stop - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

stop

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
stop
To stop SCSI commands in progress on a SAN tuner extension N port, use the stop command.
Syntax Description
all
command-id cmd-id
Defaults None.
Command Modes
SAN extension N port configuration submode.
Command History Release
2.0(1b)
Usage Guidelines None.
Examples The following example stops all SCSI command on a SAN extension tuner N port.
switch# san-ext-tuner
switch(san-ext)# nWWN 10:00:00:00:00:00:00:00
switch(san-ext)# nport pwwn 12:00:00:00:00:00:00:56 vsan 13 interface gigabitethernet
1/2
switch(san-ext-nport)# stop all
The following example stops a specific SCSI command on a SAN extension tuner N port.
switch# san-ext-tuner
switch(san-ext)# nWWN 10:00:00:00:00:00:00:00
switch(san-ext)# nport pwwn 12:00:00:00:00:00:00:56 vsan 13 interface gigabitethernet
1/2
switch(san-ext-nport)# stop command-id 100
Related Commands Command
nport pwwn
read command-id
san-ext-tuner
show san-ext-tuner
write command-id
Cisco MDS 9000 Family Command Reference
21-76
stop {all | command-id cmd-id}
Stops all SCSI commands.
Stops a specific SCSI command identified by the command number. The
range is 0 to 2147483647.
Modification
This command was introduced.
Description
Configures a SAN extension tuner N port.
Configures a SCSI read command for a SAN extension tuner N
port.
Enables the SAN extension tuner feature.
Displays SAN extension tuner information.
Configures a SCSI write command for a SAN extension tuner N
port.
Chapter 21 S Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x