Chapter 21
S Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
This will shut the requested interfaces Do you want to continue (y/n)?
Serdes loopback test on interface fc 4/1 was successful.
The following example performs a Serdes loopback test within ports for the entire module and overrides
the frame count configured on the switch.
switch# system health serdes-loopback interface fc 3/1 frame-count 10
This will shut the requested interfaces Do you want to continue (y/n)? [n] y
Serdes loopback test passed for module 3 port 1
Related Commands
Command
system health
system health
external-loopback
system health
internal-loopback
OL-18089-01, Cisco MDS NX-OS Release 4.x
Description
Configures Online Health Management System (OHMS) features for a
specified interface or for the entire switch.
Explicitly runs an external OHMS loopback test on demand for a specified
interface or module.
To explicitly run an internal OHMS loopback test on demand for a specified
interface or module.
system health serdes-loopback
Cisco MDS 9000 Family Command Reference
[n] y
21-121