Show Arp - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show arp

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show arp
To display Address Resolution Protocol (ARP) entries, use the show arp command.
Syntax Description
This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples
This displays the ARP table.
switch# show arp
Protocol Address
Internet
Internet
Related Commands Command
clear arp-cache
Cisco MDS 9000 Family Command Reference
22-8
show arp
Modification
This command was introduced.
171.1.1.1
172.2.0.1
Description
Clears the arp-cache table entries.
Age (min) Hardware Addr
0 0006.5bec.699c
4 0000.0c07.ac01
Chapter 22 Show Commands
Type Interface
ARPA mgmt0
ARPA mgmt0
OL-18089-01, Cisco MDS NX-OS Release 4.x