Show Ips Stats - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show ips stats

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show ips stats
To display IP storage statistics, use the show ips stats command.
show ips stats {buffer | dma-bridge | icmp | ip | mac} interface gigabitethernet slot/port
show ips stats {hw-comp | tcp} {all | interface gigabitethernet slot/port}
Syntax Description buffer
dma-bridge
icmp
ip
mac
hw-comp
tcp
all
interface gigabitethernet
slot/port
Defaults None.
Command Modes EXEC mode.
Command History Release
1.1(1)
Usage Guidelines
Use the show ips stats icmp interface gigabitethernet command to obtain ICMP statistics for the
selected interface.
Use the show ips stats ip interface gigabitethernet 2/1 command to obtain IP statistics for the selected
interface.
Use the show ips stats mac interface gigabitethernet command to obtain Ethernet statistics for the
selected interface.
Use the show ips stats tcp interface gigabitethernet command to obtain TCP stats along with the
connection list and TCP state or the selected interface.
Examples The following example displays iSCSI buffer statistics:
switch# show ips stats buffer interface gigabitethernet 1/2
Buffer Statistics for port GigabitEthernet1/2
Cisco MDS 9000 Family Command Reference
22-190
Modification
This command was introduced.
Mbuf stats
164248 total mbufs, 82119 free mbufs, 0 mbuf alloc failures
123186 mbuf high watermark, 20531 mbuf low watermark
Displays IP storage buffer information.
Displays the direct memory access (DMA) statistics.
Displays ICMP statistics.
Displays IP statistics.
Displays MAC statistics.
Displays hardware compression statistics.
Displays TCP statistics
Displays statistical information for all interfaces.
Specifies a Gigabit Ethernet interface by the slot and port.
Chapter 22 Show Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x