Ntp Distribute - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

ntp distribute

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
ntp distribute
To enable Cisco Fabric Services (CFS) distribution for Network Time Protocol (NTP), use the ntp
distribute command. To disable this feature, use the no form of the command.
Syntax Description This command has no other arguments or keywords.
Defaults
Disabled.
Command Modes
Configuration mode.
Command History This command was introduced in Cisco MDS SAN-OS Release 1.0(2).
Command History Release
2.0(x)
Usage Guidelines
Before distributing the Fibre Channel timer changes to the fabric, the temporary changes to the
configuration must be committed to the active configuration using the ntp commit command.
Examples The following example shows how to distribute the active NTP configuration to the fabric.
switch# config terminal
switch(config)# ntp distribute
Related Commands Command
ntp commit
show ntp
Cisco MDS 9000 Family Command Reference
16-14
ntp distribute
no ntp distribute
Modification
This command was introduced.
Description
Commits the NTP configuration changes to the active configuration.
Displays NTP information.
Chapter 16 N Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x