Show Cfs Regions - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show cfs regions

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show cfs regions
To display the list of distribution-enabled applications with peers in a region, use the show cfs region
command.
Syntax Description brief region-id
name app-name
region region-id
Defaults None.
Command Modes
EXEC mode.
Command History Release
3.2(1)
Usage Guidelines None.
Examples The following example shows all the region information with peers:
switch# show cfs regions
Region-ID
Application: callhome
Scope
-------------------------------------------------------------------------
Switch WWN
-------------------------------------------------------------------------
20:00:00:0d:ec:04:99:c0 209.165.200.226 [Local]
20:00:00:0d:ec:04:99:c1 209.165.200.226
20:00:00:0d:ec:04:99:c2 209.165.200.226
Total number of entries = 3
Region-ID
Application: ntp
Scope
-------------------------------------------------------------------------
Switch WWN
-------------------------------------------------------------------------
20:00:00:0d:ec:06:55:c0 209.165.200.226 [Local]
Total number of entries = 1
Cisco MDS 9000 Family Command Reference
22-24
show cfs regions [brief [ region-id ] | name [ name app-name] | region [ region-id ] ]
Displays all configured regions and applications without peers.
Displays all peers and region information for a given application.
Displays all configured applications with peers.
Modification
This command was introduced.
: 1
: Physical-all
IP Address
switch-
switch-2.cisco.com
switch-3.cisco.com
: 1
: Physical-all
IP Address
switch-1
Chapter 22 Show Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x